Protect Your Home with the Burglar Stopper Wireless Home Security System

DIY Home Security

Burglar Stopper Wireless Home Security System

Home Controls is proud to offer the Burglar Stopper Wire-Free Home Protection System from STI (Safety Technology International). This complete DIY security system comes with a motion sensor and two door/window sensors, as well as a control panel and a keychain remote. When one of the sensors is triggered, the “Smart Panel” sounds a built-in alarm. All hardware is included, making this kit ready for installation right out of the box.

  • Built-in 120 dB+ siren
  • Supports unlimited sensors
  • Wireless range up to 490 feet
  • Full backup power supply
  • One year limited warranty

See It Here:

Smart Security Controls

The Burglar Stopper Smart Panel is the hub of your security system. It supports an unlimited number of wireless sensors and accessories, allowing you to build out and customize the system to perfectly suit your unique home. Sensors can be grouped into eight preset security zones. When a sensor is activated, the panel will flash its indicator lights and sound its 120 dB+ siren or alert chime (selectable).

Built-In Alarm Sounds

The Smart Panel features four operation modes: Alarm, Alert, Home, and Standby. Your desired mode can be chosen either at the Smart Panel or with the included key fob remote control. When programming the Smart Panel, you can also adjust the alarm’s duration (1 to 6 minutes), as well as the entry/exit delay (10-60 seconds). The panel is powered by the included plug-in AC adaptor. You can also install a 9V battery (not included) for backup power in case of an outage.

DIY Wireless Sensors

The included wireless, battery-powered security sensors communicate with the Smart Panel. When a sensor is triggered, it sends a wireless signal to the panel, thereby activating an alarm.

The two door/window sensors are used to monitor the open/closed status of two doors, two windows, or one door and one window. Each door/window sensor consists of two parts: 1) the wireless transmitter, which mounts on the door/window frame, and 2) the magnet, which mounts on the object itself. When the door/window is opened, the two parts separate and the transmitter triggers an alarm at the Smart Panel. Both components are easily mounted with the included adhesive pads.

The wireless motion sensor installs with the included mounting bracket and hardware. Once mounted, it detects movement within a 120-degree angle up to approximately 50 feet away. The motion sensor’s adjustable sensitivity settings make it ideal for various areas, including hallways, rooms, front/back door areas, sheds, and more. You can target your motion detection with three detection range options:

  • High: 15 meters (~50 feet)
  • Medium: 6 meters (~20 feet)
  • Low: 4 meters (~13 feet)

The included ball-head joint mounting bracket also allows you to perfectly position the sensor, aimed in any direction you choose.

Kit Includes

  • Smart Panel
  • Key Fob Remote Control
  • (2) Door/Window Sensors
  • Motion Sensor
  • AC Adaptor for Smart Panel
  • Installation Hardware:
    • Double-Sided Adhesive Strips for Door/Window Sensor
    • Mounting Hardware for Smart Panel
    • Mounting Bracket for Motion Sensor
    • Mounting Template
  • Quick Start Guide
  • User Guide

NOTE: Batteries not included. Door/window sensors require two AAA alkaline batteries each. Motion sensor requires one 9V alkaline battery.

About Home Controls (410 Articles)
In business for more than 29 years, Home Controls is the premier national distributor for the most comprehensive and unique home automation systems.

Leave a Reply

%d bloggers like this: