How to install smart faucets? (9 Sasy Steps)

Before putting in a smart faucet, turn off the water and remove the old faucet. Then, follow the manufacturer’s instructions to connect the smart faucet’s parts, lock it in place, turn on the water supply again, and ensure it works.

One of the dirtiest places in your home is the kitchen faucet. After touching raw meat or cookie dough, dirty hands turn on the tap, spreading germs to the handles. And dirt builds up if you don’t clean your faucet every time you use it.

In an age where technology is becoming increasingly integrated into our daily lives, our homes are quickly becoming hubs of creativity, convenience, and efficiency. One striking example of this trend is the rapid rise of smart taps. The way we use water in the kitchen and bathroom is changing because of these taps. Now that we live in an age with touchless, voice-activated, and app-controlled faucets, people no longer have to manually change the temperature of the water or fight to control the flow of water while their hands are wet.

In this in-depth guide, we explore the world of smart faucets and give you step-by-step instructions on how to install smart faucets?, expert tips, and other helpful information on installing these modern technology marvels. Join us as we start a trip to discover how smart faucets can be used to their full potential and change how water flows in our homes.

What are Smart Faucets, and How do they work?

How to install smart faucets?

Electronic sensors are what allow self-operating smart taps to function correctly. You don’t need to turn the tap knob because the water will automatically turn on (or off) whenever these sensors detect motion in the room. The vast majority of them can be utilized without needing one’s hands.  

Because some of them can even be controlled by voice, you won’t need to touch the faucet to fill containers or adjust the water temperature. There are two primary power sources for smart faucets: batteries and an electrical outlet underneath the sink.

Installing Smart Faucet

Things You Need

  • We used the Arbor kitchen faucet from Moen, which had no handle.
  • No-touch faucet
  • Screwdriver
  • Drill with a 3/32-inch drill bit.
  • Adjustable wrench
  • Measurement tape
  • Batteries

Preparation Before Installation

  • You will require tap water before installation. If the water is dirty, a filter could be necessary to prevent damage to the valve and other components.
  • The infrared camera might not operate properly if the device is placed close to a glossy surface or faces bright lights.
  • A booster should be used if the water pressure is less than 0.05 mpa to prevent the device from breaking.
  • To protect the equipment, a decompressor should be employed if the water pressure is more significant than 0.7 MPA.

Step-by-step Guide:

How to install smart faucets?

Step 1: Place the faucet.

Turn off the taps for hot and cold water in the kitchen sink. First, take off the old faucet. Then, thread the new faucet’s shank, hoses, and data wire through the deck gasket. Adjust the faucet so that the bottom of the body of the tap is facing you. After that, you must put the shank, the hoses, and the wire through the mounting hole. Install the deck plate if there is more than one hole. Before you go any further, ensure that the spout is facing you and that the handle is on the right side of the tap.

Step 2: Make sure it stays in place.

First, slide the fitting washer over the faucet’s shank. Then, slide the support plate over the wires under the sink. Check to see if you can fit the hoses and the data wire into the curve in the washer. First, ensure the faucet is in the right place on the table or sink. Then, screw the mounting nut onto the faucet shank. Use the tool you were given to turn the nut clockwise.

The editor says to put the screwdriver through the holes on the bottom of the plate. It makes getting tight easy.

Step 3: Put the hose bracket for the kitchen tap in place.

Install the hose bracket to be almost two inches from the end of the linked hose. When you put the stand onto the end of the faucet, a hose-guide nut will keep it from moving. The lead was put into the spout of the tap. First, take off the protective cap on the end of the hose. Then, use the quick-connect lines to connect the hose to the faucet. You must push the clip, let go of the button, and listen for the click to make a safe link.

Step 4: Connect the hose and supply line.

Find the right openings on the control box and plug the hoses and supply lines into them. Please remove the caps that protect the ends of the lines and then put each one in place by itself. After gently pulling each hose, check to ensure it is still connected. Set up the links for the lines that bring in cold and hot water. It would be best if you had a wrench with a flexible head for the connection to be tightened appropriately. The connection should be tight, but not too tight. Use the same method to secure the cold side.

The editor says you should connect the right water lines to suitable water inlets. Remember that the hot water line has a white tag that can be used to tell it apart from the other two lines.

Step 5: Put the control box in place.

You can put it together by placing the control box on the nut that holds the hose. If you want to connect the control box to the cabinet’s base, ensure the data cable and hoses can reach it.

Step 6:Put the Spray Wand back where it belongs.

Before connecting the spray wand to the pull-down hose, you have to take off the safety cover on the spray wand and ensure the rubber washer and screen are in place. Before you put the spray wand on the pull-down hose:

  1. Use an adjustable wrench to tighten the hose nut until it is flat with the spray wand.
  2. Put the sprayer on the hose.
  3. Don’t turn the screw too much in either way.
  4. Put a weight right below the white mark you saw on the pull-down hose you found.

Step 7: Put the battery pack in place.

Ensure the wire can reach the bottom of the control box before connecting the battery pack. Make sure the batteries are in before you put the top back on. Either a screw or double-sided tape can be used to attach the battery pack to the wall.

Step 8: Use a data wire to put in the kitchen faucet.

The data wire is put into the control box after removing the protective cap. Ensure that the data port and the tiny USB connection are in the right places. All hoses and wires, except for the pull-down hose, can be held together with zip ties. After that, connect the wire from the battery pack to the control box. Ensure there is nothing within three feet of the sensors on the faucet. This will make sure the water starts flowing correctly. The bottom of the tap will flash blue lights and light up.

Step 9: Turn on the water.

Turn on both the sources of cold and hot water. To ensure the pull-down hose works, you should ensure there are no cleaning tools or other things under the sink that could get in the way.

Benefits of using smart faucets

Installing a hands-free kitchen or bathroom tap is the best way to get rid of germs for good. The device turns on when your hand moves, so it will know when you need a wash and turn on instantly. You’ll save time and water and improve your health at the same time. A touchless tap is also easy to put in.

  • Hands-Free: You can start and stop the water flow from the kitchen tap without using your hands. You can move the faucet, touch any part, or use your voice. Fingerprints, dirt, and food that has yet to be eaten should not be near the opening of your sink. This will help keep bacteria and germs from spreading.
  • You can set the temperature: Every intelligent tap on the market right now allows you to set the water temperature from it. You can change the temperature of the water by hand by changing the hot/cold mixing lever to the setting you want, or you can use the app to make the changes.
  • Less money spent on utilities: A method that only gives out the amount of water needed each month can cut the amount of water wasted each month by a lot. By letting the sink tap run for 30 seconds before washing your hands, you can waste up to a gallon of water. It may not seem like much, but think about how many people in your home wash their hands and how often they do it. This trash gets full very fast.

Another way to save time and water, specially in the bathroom, will be to use a shower timer.


Smart faucets eliminate the need to touch handles with what could be dirty hands by using motion sensors and buttons that don’t need to be connected. This helps clean up your house. Also, these taps’ temperature and flow controls are easy to use. This makes it easy to wash your hands or food.

Smart faucets have benefits immediately and also fit in with the more significant trend of putting smart house technologies in homes. This step improves the look of your living spaces and makes your house worth more. People who want to buy or rent can find this especially useful in today’s tech-savvy market.

Also, many smart taps let you track how much water you use over time because they can track data. This can help you find trends and places where you want to make changes. People may be more careful about how much water they use because this new information can help the Earth in the long run.

In the end, installing smart faucets is more than just handy. They show how to live in the modern world in a way that considers health, the economy, and the environment. Following the complete installation guide and using the devices’ benefits can improve your life and help move the world toward a more environmentally friendly future.

Smart Faucets FAQs


Do I need special tools to install a smart faucet?

Most smart faucets come with kits with all the tools you need to install them. But having a wrench, pliers, and a screwdriver can make the installation go more smoothly.

Are smart faucets compatible with any sink?

Smart faucets are made to work with standard sinks. Before you buy, look at the faucet’s specs and compare them to the size of your sink to ensure it will fit.

Do I need to hire a professional plumber to install a smart faucet?

Even if you don’t know much about plumbing, many smart faucet setups are made to be easy and can be done on your own. But if you’re unsure how to do plumbing chores, you should talk to a professional plumber.

Do I need a power source for a smart faucet?

Yes, most electrical features of smart faucets need a power source. Some types work with batteries; others can be plugged into an outlet under the sink. Before placement, make sure to check the power needs.

Can I still use the faucet manually if the smart features fail?

Yes, most smart taps have manual handles or levers that you can use to control the water flow and temperature if the smart features stop working.

Will installing a smart faucet affect my water pressure?

If the installation is done right, it shouldn’t significantly affect the water flow. If you notice a change in the water flow after installation, check to see if there were any problems with the installation.

Are there any maintenance requirements for smart faucets?

It’s best to clean it regularly to keep minerals from building up and ensure the sensors are transparent. Some smart taps can also clean themselves. Instructions from the maker will tell you exactly how to take care of your item.

David Coleman
Latest posts by David Coleman (see all)

Leave a Comment